IMPACT Lab
IMPACT Lab emblem

IMPACTLab

Intelligent Mechanics, Performance, And Computational Technologies

University of Idaho

Department of Mechanical Engineering · University of Idaho

Computational mechanics for materials and systems under extreme conditions

We build intelligent computational frameworks to predict and engineer how materials, structures and systems perform when pushed to their limits: under impact, at high strain rates, during manufacturing and in reactive environments.

Research

Tougher, smarter and more sustainable performance

Our research program combines particle and mesh-based numerical methods, multiscale modeling and physics-informed AI, run at scale on high-performance computers. Each model we build is meant to answer an engineering question, and we validate against experiments with our national laboratory collaborators.

TougherResisting failure

Impact- and blast-resistant structures, protective materials and fracture across scales.

SmarterPredicting in real time

Digital twins, surrogate models and closed-loop optimization of manufacturing processes.

More sustainableUsing less, wasting less

Energy storage, thermal management and reactive processing for polymer recycling.

Research thrusts · where the lab is headed

THRUST 01

Advanced manufacturing simulation

We will develop GPU-accelerated models of powder-scale mechanics, melt pool dynamics, and sintering and densification, and pair them with physics-informed neural networks to optimize manufacturing processes in a closed loop.

Target applications: additive manufacturing, powder metallurgy, laser processing.

DEMMPMMelt poolSintering
THRUST 02

Material failure and fracture across scales

We aim to connect fracture from atomic bonds through grain-level microstructure to structural response. We will build on molecular dynamics and particle methods and extend them with crystal plasticity and peridynamics.

Target applications: impact- and blast-resistant structures, protection systems, aerospace materials.

Molecular dynamicsPeridynamicsCrystal plasticity
THRUST 03

Thermo-reactive materials and energy systems

We will couple thermal, mechanical and chemical physics to model mechanochemical reactors, phase-change composites for thermal storage, and electrothermal processing for recycling and carbon capture.

Target applications: battery thermal management, solar thermal systems, sustainable manufacturing.

MechanochemistryMultiphysicsPhase change
THRUST 04

Physics-informed AI and data-driven mechanics

We will develop neural operators, physics-informed neural networks, Bayesian uncertainty quantification and data-driven constitutive models that make high-fidelity simulation fast enough for real-time decisions.

Target applications: digital twins, structural health monitoring, inverse design, manufacturing surrogates.

PINNsDeepONetBayesian UQ

Our foundation · what we bring

Material point method

Large-deformation and fluid–solid interaction modeling, including hybrid FEM–MPM for blast loading.

Molecular dynamics

Atomistic simulation of nanoporous metals under deformation and impact.

High-performance computing

GPU-accelerated solvers on DOE leadership computing systems.

Experimental validation

Models checked against data, from explosive field tests to single-impact experiments.

Collaborators

Idaho National Laboratory

Including the Center for Advanced Energy Studies (CAES).

Oak Ridge National Laboratory

Ongoing work in computational mechanics and HPC.

The DOE research ecosystem

National laboratories, user facilities and computing programs.

People

The team

IMPACT Lab launched in Fall 2026 and is growing.

Portrait of Dr. Mohammed H. Saffarini

Mohammed H. Saffarini, PhD

Assistant Professor of Mechanical Engineering · Principal Investigator

Dr. Saffarini joined the University of Idaho from Oak Ridge National Laboratory, where he was a Postdoctoral Research Associate developing GPU-accelerated computational mechanics for the Department of Energy, including work on mechanochemical polymer recycling. Before that, as a postdoctoral researcher at the University of Missouri, he developed material point method and hybrid FEM–MPM models for an Army research program on explosion-resistant design.

He earned his PhD in Engineering Mechanics at Louisiana State University with a dissertation on multiscale modeling of nano-cellular metals using molecular dynamics. Before his doctorate he spent five years as an offshore methods engineer at SAIPEM, which still shapes how he chooses research problems.

Areas of expertise

  • Computational Mechanics
  • Multiscale and Multiphysics Modeling
  • Mesh-based, Particle-based, and Hybrid Numerical Methods
  • Thermo-Mechano-Chemical Modeling
  • Mechanics of Materials for Extreme Environments

Education

  • Ph.D., Engineering Mechanics
    Louisiana State University, USA, 2021
  • M.S.E.S., Materials Science and Engineering
    Louisiana State University, USA, 2021
  • M.Sc., Civil Engineering (Engineering Mechanics)
    American University of Sharjah, UAE, 2016
  • B.Sc., Civil Engineering
    American University of Sharjah, UAE, 2013

Teaching

  • Mechanics of Materials

Graduate students

Portrait of Mahmudul Hasan

Mahmudul Hasan

PhD Student, Mechanical Engineering

Mahmudul Hasan is a PhD student in Mechanical Engineering at the University of Idaho, conducting research in the IMPACT Lab. His research centers on computational materials science, mechanics of materials, nanoscale thermal transport and energy materials, with an emphasis on multiscale modeling and simulation. He studies the mechanical behavior and thermal transport properties of advanced materials, particularly two-dimensional MXenes, porous structures and high-entropy alloys. A key part of his work uses molecular dynamics simulations to examine how strain rate, temperature, porosity and defect density govern material performance.

Research interests

Molecular dynamicsMXenesPorous materialsHigh-entropy alloysThermal transport

Education

  • M.Sc., Mechanical Engineering
    Bangladesh University of Engineering & Technology (BUET)
  • B.Sc., Mechanical Engineering
    Khulna University of Engineering & Technology (KUET)

PhD student

Fully funded position open. See details.

Undergraduate researchers

Simulation, visualization and code benchmarking projects.

Publications

Selected publications

The full, current list is on Google Scholar.

  1. 2026
    Spatially resolved reaction environments in mechanochemical upcycling of polymers.
    K. Gołąbek, Y. Chang, L. R. Mellinger, M. V. Rodrigues, C. de Souza Coutinho Nogueira, F. B. Passos, Y. Xing, A. R. Passos, M. H. Saffarini, A. B. Isner, D. S. Sholl, C. Sievers. Chem 12(1), 102754. doi:10.1016/j.chempr.2025.102754
  2. 2024
    Verification and validation of modeling of fluid–solid interaction in explosion-resistant designs using material point method.
    M. H. Saffarini, Z. Chen, A. Elbelbisi, H. Salim, K. Perry, A. L. Bowman, S. D. Robert. Buildings 14(10). doi:10.3390/buildings14103137
  3. 2023
    Atomistic study of the impact response of bicontinuous nanoporous gold as a protection medium: Effect of porous–nonporous interface on failure evolution.
    M. H. Saffarini, T. Sewell, Y. C. Su, Z. Chen. Computational Materials Science 228, 112363. doi:10.1016/j.commatsci.2023.112363
  4. 2023
    Enhanced blast response simulation of LG panels using an elasto-damage model with the finite element method.
    A. Elbelbisi, A. Elsisi, M. H. Saffarini, H. Salim, Z. Chen. Buildings 13(12). doi:10.3390/buildings13123025
  5. 2021
    Temperature effect on nanoporous gold under uniaxial tension and compression.
    M. H. Saffarini, G. Z. Voyiadjis, C. J. Ruestes. Computational Materials Science 200, 110766. doi:10.1016/j.commatsci.2021.110766
  6. 2021
    Ligament size dependency of strain hardening and ductility in nanoporous gold.
    M. H. Saffarini, G. Z. Voyiadjis, C. J. Ruestes, M. Yaghoobi. Computational Materials Science 186, 109920. doi:10.1016/j.commatsci.2020.109920
Join us

Fully funded PhD positions

We are looking for students who enjoy turning physics into code and code into engineering decisions. Our applications span defense, manufacturing and energy, so there is room for different interests.

What you'll do

  • Develop and run large-scale simulations on high-performance computers
  • Work on problems tied to DOE, DoD and NSF priorities
  • Collaborate with Idaho National Laboratory, Oak Ridge National Laboratory and the broader DOE system
  • Publish, present at national conferences and release open-source tools

Mentoring is hands-on, with weekly one-on-one meetings and a gradual path to independence.

How to apply

Send a message through the contact form with:

  • A short note on which research thrust interests you and why
  • Your background and a link to your CV (Google Drive, Dropbox or your website)

Apply through the form

Suited to backgrounds in mechanical, civil, aerospace or materials engineering, physics or applied math. Programming experience (Python, C++ or CUDA) is a plus.

Contact

Get in touch

Prospective students, collaborators and visitors are welcome. Send a message and Dr. Saffarini will reply by email.

Office

Engineering/Physics Building, Room 324P
University of Idaho
Moscow, ID 83844

Department

Mechanical Engineering
College of Engineering